Sindoh A611dn Manual de usuario descargar pdf (Pagina 61)

Using the Printer

3-17

6. Network Setting

First, you must set the IP address for network print and control. Basic network set-up can be performed using

the “SINDOH Network Printer Setup” software program in the control panel of the product or the enclosed CD.

Wire Network Setting

First, you must set the IP address for network print and control. The DHCP server automatically allocate or fix

the IP. Also, the IP address can be manually set.

Note

- Use the “SINDOH Network Printer Setup” program to set the IPv6 address.

Using the Control Panel

1. When the printer is ready, press the【MENU】 button.

2. Press 【▲】or 【▼】 until settings appear, and then press the【OK】 button.

Operate in the order of: Network Settings -> Wired Network -> Setup Connection.

① IP Automatic setting: select DHCP and press the 【OK】 button.

② IP Manual setting: select Static, enter the IP Address, Netmask, Gateway suitable for

the network in use, and press the 【OK】 button.

Note

- Use “SINDOH Network Printer Setup” program to set the IPv6 address.

IP Manual Setting

Follow the below instructions to enter the IP address:

① Use 【▲】 or 【▼】 to select Network Settings -> Wired Network or Wireless Network

-> Setup Connection -> Select Manual IP Address -> IP Address.

 

IP Address

0 . . .





② Use [Number] buttons to enter IP as shown above

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 125 126

Sin comentarios

Sindoh A611dn Manual de usuario Pagina 61