Sindoh A611dn Manual de usuario descargar pdf (Pagina 116)

Troubleshooting

5-12

Control Panel Troubleshooting

Problem 1: LCD Displays nothing.

Solution: Turn off the printer, wait 10 seconds, and then turn on the device again.

If the message is not displayed, turn off the device and contact your place of purchase.

Printer Troubleshooting

Problem 1: Slow in printing paper with a width of less than 182mm.

Solution: Narrow paper slows printing speed.

For faster printing speed, use paper of 182 mm or wider in width.

Problem 2: The printer cannot print at all or black stain is printed on the right

side of paper.

Solution: Check if the cartridge is properly installed.

Open the front cover and reset the cartridge.

Problem 3: Printed paper is warped or crinkled.

Solution:

Problem 4: The printer cannot print.

Solution: 1) Check if Ready is displayed on the LCD.

2) Check if paper has been fed.

3) Check if the device language and driver are properly selected.

4) Check if the USB cable is properly connected

5) Check if the correct paper size is selected in the printer setting or printer driver.

6) Check if data sending was not paused on the device status window.

Note

- Device status checking methods may vary by OS.

For more information, see the OS manual or Help.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 125 126

Sin comentarios

Sindoh A611dn Manual de usuario Pagina 116